Foaming hand sanitizer is more popular with consumers

 

During COVID-19 epidemic, many customers prefer to use foam bottled hand sanitizer. 

 

The characteristic of foam hand sanitizer is that it is already foamed when squeezed out, which is very time-saving. In addition, the composition is not comparable to ordinary hand sanitizers. A big difference. Careful people will find that ordinary hand sanitizers are particularly easy to solidify in cold weather. Under normal weather, squeeze it out and need a lot of water to rinse. The foam is smooth and delicate, and has stronger decontamination ability. 

Compared with soap, there is no cross-infection. Foaming hand sanitizer, through the pump head with magic power, directly out of rich foam, it is more convenient to wash hands, flushing is also very fast, and the water consumption is half of ordinary hand sanitizer. Our factory produces foam bottles of various capacities, welcome new and old customers to buy.

Introduction of lotion pump dispenser with external spring

For nozzles and pump heads, everyone should know that it is necessary to place a spring inside the product center. The external pump, that is, the spring in the center of the nozzle/pump head, is visible externally, generally placed above the pump core. The assembly is directly connected to the spray head/pump head cap. The advantage of the external pump is that it is not in direct contact with the liquid in the bottle, which is environmentally friendly and hygienic, and can prevent 100% of the rust of individual springs from affecting the quality of the product in the bottle. Of course, this problem is rare, because most of the springs are Is processed. In addition, the power of the external pump is larger than that of the internal pump, so the general pump head uses more external pumps, which is suitable for more viscous liquids such as emulsion stock solution.

Foam Pump Hand Sanitizer Save More Money

Foam Pump Hand Sanitizer Save More Money

Tell you why foam pump hand sanitizer save more money for you.

1. Convenient to use: the pump head pumps out foamy products, eliminating the process of rubbing and foaming with water.

2. Dosage saving: each use is 1/2 of the amount of ordinary hand sanitizer.

3.Double the effect: Direct foaming effect, not easy to fall, so that the effective ingredients in the foam are fully utilized, greatly improving the cleaning, sterilizing and moisturizing effects.

The principle of foaming hand sanitizer directly pressing out foam:

There is a special device at the mouth of the bottle to fully mix the air and the blowing agent. The middle school must have done such an experiment. The drooping paper strip floated to the place where the gas flows, because the fluid has a decompression effect, the middle of the foam gun is a normal gun head, and a sleeve with many holes on the side is added outside, and the foam agent is sprayed from the middle of the sleeve Outdated, because the air pressure is reduced, a lot of air is drawn in from the side and mixed with it to produce foam.

By Canvard Packaging Factory

Deodorant Stick tube Antiperspirant container

This kind plastic roll ball bottle is a good choice for packaging deodorant sticks

10oz 300ml Square white PET shampoo body lotion bottle/Bottiglia per shampoo PET

Product: 10oz 300ml White square PET bottle with white lotion dispenser pump for shampoo conditioner body shower

Capacity: 10oz 300ml

Material Features:Food grade top quality PET plastic material. 
No BPA, No leakage, Durable, Eco friendly, Safety.

Application: apply to body care, body lotion, body massage, body cream, shampoo, conditioner

Tell you if it is necessary to open a new mold when ordering cosmetic packaging created by Canvard Packaging

Tell you if it is necessary to open a new mold when ordering cosmetic packaging created by Canvard Packaging

I believe that long-term customers who order cosmetic packaging have learned that many bottle packaging in this industry is standardized. Many products have the same or similar styles. And most customers are willing to choose these standardized plastic bottles to contain their cosmetics.

So is it necessary for customers to design their own styles, and to open a mold separately?

The following two points are factors for customers to consider.

On the one hand, cost, opening molds requires paying extra mold fees. The complexity of the mold, the number of cavities, and the product design style will affect the mold fees. If your annual purchase volume is not large and does not exceed 100,000, we do not recommend customers to open a new mold, because the annual product sales are too small, the mold costs are not worthwhile.

On the other hand, time, it takes a certain amount of time to develop the mold, which depends on the complexity of the mold you need to open and the number of molds. The more complex, the longer the mold development time, because mold molding takes time, and mold debugging also will take some time, so the time cost is very large, ranging from one or two months to more than a few months. Ordinary companies cannot afford such time cost, and would rather choose some of the existing molds in our factory.

Therefore, whether to develop a new mold requires careful consideration. Keep your costs to a minimum. Generally, big companies choose new molds because their annual purchases are very large. Opening molds can make them have their own company logo packaging which is more conducive to promotion in the market and increase customer recognition. Moreover, the existing molds are all mature molds, and the mold performance is stable, and no problems will occur in use. A new mold may have new problems, especially for plastic bottles with your unique and irregular shapes.

Created by Canvard Packaging

A few things you need to know before buying plastic packaging

A few things you need to know before buying plastic packaging

Some people may be new to the cosmetics industry, so they do n’t know much about cosmetics packaging, leading to hesitation in choosing cosmetics packaging, or even choosing a wrong packaging.

Below I will briefly analyze a few things you need to know before buying plastic packaging.

First, you need to understand the material of plastic packaging bottles, because different materials have different properties. For example, if you want your product to be in a plastic bottle, it can be directly seen by consumers. At this time, we recommend that you choose a plastic bottle made of PET, because the PET material itself is highly transparent, and the price is relatively cheaper than acrylic and PS material. You cannot choose PP or PE bottle, because the PP and PE materials themselves are not completely transparent, and consumers cannot clearly see the contents of the plastic bottles.

Second, you need to know what you want to contain in a plastic bottle? If you buy plastic bottles for lotions, you can choose bottles with lotion pump heads. If your product positioning is high-end, you can choose airless pump bottles and acrylic bottles to highlight your product quality. But if you want to fill facial cleanser or skin care lotion, you can choose a small and easy-to-carry plastic soft tube package, because the tube only needs to be squeezed lightly, and the price is very affordable. Or if you want to pack a very sticky cream-like product, we recommend that you buy a cream jar, because cream jars are generally filled with high consistency products, which is convenient and cheap. If it is a foam product, we recommend you to buy a foam bottle.

Third, the compatibility of product contents. Some cosmetic ingredients cannot be exposed to light to prevent volatilization. This is why you need to buy non-transparent and highly protective plastic bottles, such as airless pump bottles and acrylic bottles. Or, if your skin care ingredients are corrosive, you should use some materials with strong barrier properties. The so-called barrier plastic bottle refers to the use of a special processing technology (or combined with a special material at the same time), so that this kind of plastic bottle has the function of effectively blocking the penetration of organic solvents in emulsifiable concentrate pesticides, while retaining the plastic bottle itself is a special plastic bottle with excellent properties such as light weight, many variations (various shapes), and non-fragility.