New oval airless pump bottle-15g-30g-50g

Oval airless pump bottle15g, 30g, 50g

Material: PP

The traditional airless pump bottle is cylindrical.

We now break the fixed design, and created this oval airless pump bottle.

New design, new attractive, new best sell.

2014 new 30g-50g-baby care plastic cream jar

Item ref: JH-JP-085-30g-50g-face cream jar

Volume:30g-50g
Apply to cream.
MOQ:10000pcs
Color: changable
Printing: available
Application: baby care cream, face cream and others

Donot reuse the PET drink bottle-------harmful!

In Summer,a lot of people will drink bottled drink, and some nice plastic bottles are often reused  by people, or used to hold clean water, or used for oil, etc.They call this:environmental protection or saving resources. Is it really safe? After our research,that is not so safe as we thought.
The mainly raw material of food packaging is PET. but PET cannot be used in a high temperture, like 70 degree.It should be disposible product, and is regulated to be unrecyclable.
So we suggest customers donot reuse the PET bottle any more.

About Aluminium plastic tube

There are mainly 3types of plastic tube in current plastic packaging market.
Aluminium plastic tube, all plastic tube and plastic squeezed tube.

In this paragraph, we will make a brief introduction in aluminium plastic tube.
Aluminium plastic tube is squeezed together via coextrusion process, its raw material is aluminium foil and plastic film.After that, through the specialized machine to make it into a tube packaging container.the structure is PE+EAA/AL/PE+EAA/PE.
Aluminium plastic tube is especially used for cosmetics, that requires high barrier property. The barrier layer is commonly aluminium foil and the barrier property depends on the aluminium foil pinhole.
With the improvement of technique, the thickness of the aluminium foil turned to be 12mm from 40mm.
Its characteristics:
1,Blocking light, oxygen resistance and water resistance of the blocking performance, on the one hand, to prevent foreign materials into internal cosmetics, to prevent the oxidation cosmetics, at the same time, also can prevent the moisture inside the cosmetics or composition such as essence through the tube spread to the outside world, so as to guarantee the quality of the cosmetics.
2,Low cost.To achieve the same performance, that is economy way to use aluminium plastic tube.

Bottle packaging has a great influence on market sales

Bottle packaging has a great influence on market sales

  The salers always promote the cosmetics products with precious packaging. Customers will be attracted by the beautiful packaging and show their interesting.
HDPE is the favorable raw material for most common cosmetics and cleansing cosmetics because of the cheaper cost. But we cannot see the inside throught a HDPE bottle.
  But we can see many clear plastic bottles in the market shelf, their materials are PET, PP and more. Those bottles are more appreciation than those opaque.

How to remove the residue of the glues

Tape is often used in our daily life, but it is a headache to remove the residual sludge of the gules. Now we share some good method to solve that problem.
Method 1, Alcohol, chean with few alcohol. Easy to remove in a short time.
Method 2, Acetone, qicker cleaning the residue, better than aocohol.
Method 3, Nail polish remover, the same cleaning method as previous one.
Method 4, Hand cream, cleaning back and forth.It is Grease-like material, its nature is incompatible with glues. This is the theory to remove the glues.
From Canvard Bottle Packaging Blog

Production technique of blowing mold

Plastic bottle production and blow molding technology has now reached a higher level.However,Plastic bottle production from raw material to the bottle blowing equipment to bottle blowing mold and to bottle preform, there are many room for improvement.
As for the bottle blowing mould, We don't think now bottle blowing mould cost is low. For the development of a new bottles requires a high investment cost. One of the reasons for such a high price is the production of bottle blowing mold steel material. Therefore finding alternative steel material, is one of the effective methods to reduce the bottle blowing mold cost. In addition, the weight of the bottle blowing mold tend to be heavy, a bottle blowing mold can only corresponds to one bottle shape. The improvement of bottle blowing mold structure makes a bottle blowing mold accommodates more bottle shape.
All in all, bottle blowing mould improvement of production techniques and defect will greatly promote plastic bottle production efficiency and reduce the production cost of plastic bottles.