2015年5月11日星期一

Tell you something about plastic bottle material

1,Plastic bottle material is usually made of PP, PE, K material , AS, ABS, acrylic , PET , etc.
2,Typically used for cosmetic container. Thick wall cream jar , bottle caps, corks , gaskets, pump head , dust cover are made of injection molding; PET blowing is a two-step molding , tube embryos as injection molding, product packaging is blowing molding. Other container with thinner wall like lotion bottle , washing bottle is blowing molding.
3,PET material is environmentally friendly materials, with high barrier , lightweight , shatterproof properties , chemical resistance and strong transparency,it can be made into pearl, colored , magnetic white and transparent,it is widely used in water-related gel . Bottle neck wide is 16mm, 18mm, 22mm, 24mm diameter , can be coupled pump head .
4,Acrylic material for injection bottles, poor chemical resistance, generally can not be directly loaded cream , it needs to be equipped with barrier liner , the filling is not allow too full to prevent the cream enters between the liner and acrylic bottle. To avoid crack, due to post- scratch look particularly pronounced in high permeability,transport packaging requirements are high, and the wall is especially thick , but the price is quite expensive.
5,AS, ABS: AS transparency is better than ABS.
6,Silkscreen printing have standard printing inks and UV inks , UV ink effect is much better , shiny and three-dimensional.The printing requirement should be identified before the production , the effect of different materials in the screen will be different .
By Canvard Packaging




















2015年5月6日星期三

New product-Foaming hand soap dispenser with rubber brush

Foam soap dispenser pump with rubber brush allows us to clean our skin deeply.
Smoth rubber likes our teeth brush.
It is a new attractive idea for face wash foam.
See below how it works
1, Press the foam pump several times, the foam products will be pumped out throught the rubber.

2, See the foam, then smooth skin softly.


3,Good quality rubber cleans the skin without any hurt.


2015年5月4日星期一

Packaging selection of essential oils

Essential oils are volatile aromatic substances, which are from plants, flowers, leaves, stems, roots and fruits. We can get essential oils by steam distillation method, extrusion method, soaking method or solvent extraction method.
Using a plastic bottle is easy to corrose the high concentrations of essential oils.The volatile of essential oil is very strong, so we need to use dark bottle packaging, like amber glass bottle, acrylic plastic bottle.



2015年4月23日星期四

Plastic Bottle Injection

Showing how we inject the plastic bottle.

Why an acrylic airless bottle

Traditionally, airless bottles are made of ABS and PP material. 

And acrylic plastic is always used for cream jar, and some lotion bottle for luxury cosmetics. But now we are creating the airless pump with acrylic material to upgrade the skincare lotion packaging.That is a great choice to use this acrylic airless bottle to brighten your packaging.

2015年4月7日星期二

Tell you about foam pump

A foam pump, or squeeze foamer and dispensing device is a non-aerosol way of dispensing liquid materials. The foam pump outputs the liquid in the form of foam and it is operated by squeezing. The parts of the foam pump are similar to those of the other pump devices. Many times the foaming pump comes with a protective cap. Most of the components are made from polypropylene (PP).
A foam pump emits doses of the liquid contained in the bottle in the form of foam. Foam is created in the foamer chamber. The liquid constituents are mixed in the foaming chamber and this is discharged through a nylon mesh. The neck finish size of a foam pump is bigger than the neck finish size of other types of pumps, to accommodate the foamer chamber. The usual neck size of a foam pump is 40 or 43mm.
Foamers can be purchased alone, or filled with a liquid product like soap. When the liquid is mixed with air, the liquid product can be dispersed through the pump-top as a foam. Foamers can also be re-used with different liquid products to extend the mass of the liquid by creating a foam-version

2015年3月19日星期四

Clear PET bottle with mist sprayer-spray plastic bottle40ml-60ml-80ml-100ml

This items look like a airless system, but actually that is a simple PET bottle with mist sprayer. The mist sprayer can be changed into lotion pump and screw caps

 
Capacity: 40ml-60ml-80ml-100ml
Item No.: JH-PT-208Material:PETVariety of decoration, like silkscreen printing, hotstaming, labels.
Capacity: 40ml-60ml-80ml-100ml
Item No.: JH-PT-208
Material:PET
Variety of decoration, like silkscreen printing, hotstaming, labels.